Skip to main content

Guide to Mowing Turf Grasses

Following are some basic guidelines for mowing turf grasses in the DFW area. Individual specifics will vary, and you should always be ready to modify your schedule based on local conditions.

The frequency and height of your mowing will change throughout the year as temperatures and growth vary. You will want to set your mower lowest for the first mow of the spring, and progressively higher as the year goes on.

Your goal is to cut 1/3rd of the grass blades. Cutting more than a third of the grass blades will damage your lawn. (For example: If your lawn is 3 inches high, cut off 1 inch.)

Mower Maintenance

Proper mower maintenance is a key aspect of keeping a uniform, vibrant, and lush lawn. 

  • Clean the undercarriage of your mower after each mow.
  • Sharpen the blade at the beginning and midway through each season.
  • Do not mow the lawn while the grass is wet.

Spring/Fall Mowing:

  • Bremudagrass Height: 1.5” to 2.0”
  • St Augustine Height: 2.0” to 2.5”
  • Interval: 5-7 days
  • Clippings: Bag if weeds are present

Summer Mowing:

  • Bremudagrass Height: 2.0” to 2.5”
  • St Augustine Height: 2.5” to 4.0”
  • Interval: 4-6 days
  • Clippings: Bag if weeds are present

FAQ:

  • Problem: Grass tips turn brown 1-2 days after mowing
  • Solution: Sharpen your mower blade
  • Problem: Grass is brown immediately after mowing
  • Solution: Raise the mower height and/or increase frequency of mows.
  • Problem: Lawn develops ruts after mowing
  • Solution: Add variety to your mow pattern and/or reduce watering prior to mowing. 
  • Problem: Lawn appears scalped in some spots (uneven mow height)
  • Solution: Level (roll) your lawn and/or raise the mower height.

Does your lawn need a little bit more than mowing?

Learn about our lawn care services!